Select Page

Tubular Outside End Merchandiser, Mount (TOEM)

TOEM(NH)(NW)005PH
TOEM….. Tubular Outside End Merchandiser
NH…..Nominal Height 48″ to 96″ in 6″ increments
(1219 mm to 2438 mm in 152 mm increments)
NW…..Nominal Width 24″ to 48″ in 6″ increments
(610 mm to 1219 mm in 152 mm increments)
00…..No Offset
5….. 5″ Base Height
P….. Exterior Panel
H….. Interior Panel

Finish Code
FIN1-FIN2-FIN3
FIN1….. Frame
FIN2….. Exterior Panel
FIN3….. Interior Panel

Description

  • Standard TOEM rests on floor for greater load capacity and mounts outside the gondola upright
  • May be used on gondola uprights of same height, higher uprights, or uprights with extensions
  • TOEM requires Base End Covers on gondola run
  • TOEM may be used with Hypermaxi system

Load Capacity

  • Total maximum load for all shelves installed on TOEM may not exceed 1000 lbs
  • Provided hardware must be installed, and the first three adjacent sections must have upper shelves installed on both sides
NOTE!
Use Freestanding Metal End Flat (FMEF) only.

 

NOTE!
If using a Standard Upper Shelf [SUS-(NW)(ND)] on this product it will reduce load capacity of the Standard Upper Shelf by half.