Select Page

Three-Way End Merchandiser (shown with optional canopy)

T3D….. Three-Way End Merchandiser
P….. Pegboard Backs
FW….. Front Width 36″ or 48″
(914 mm or 1219 mm)
SW….. Side Width 24″ or 36″
(610 mm or 914 mm)
NH…..Nominal Height 72″, 78″, or 84″
(1829 mm, 1981 mm, or 2134 mm)
SBD….. Side Base Depth 10″, 12″, 14″, or 16″
(254 mm, 305 mm, 356 mm, or 406 mm)
FBD….. Front Base Depth 12″, 16″, or 20″
(305 mm, 406 mm, or 508 mm)

Finish Code
FIN1….. Frames-Paint or Powder
FIN2….. Pegboard Backs-Paint
FIN3….. End Panel-Laminate
FIN4….. End Panel Edges
(Same as Laminate or Optional
T-Mold is Available)
FIN5…..Deck Top-Laminate
FIN6….. Toe Kick-Laminate
FIN7…..Deck Bumper
(Optional Bumper Mold Available)
FIN8…..Metal Top

SKU: T3DP(FW)(SW)(NH)-(SBD)(FBD) Categories: , , Tags: , ,


  • Designed with broad selection of widths, depths, and heights to match adjoining
    fixture run
  • May be used at end of gondola/wall and heavy-duty racking runs
    Laminated deck/rear panel have T-Mold edging
  • Optional Bumper Mold available for deck only
  • 8″ (203 mm) high optional laminated canopy (ordered separately) has provision for light
    fixtures (also ordered separately)
  • Section loading front and sides: 500 lbs per section
  • Section loading front and sides: 500 lbs
  • Shelf load capacity 200 lbs
Unit does not include Upper Shelves. It is recommended that shelves be tiered for
better lighting, with the depth of lowest shelf being 2″ (51 mm) less than base depth.


Each of the 3 panel sections are rated at 500 lbs of total weight. (Sections 1, 2, & 3)
Each shelf on the fixture must not exceed 200 lbs of load.
To reduce forward deflection, it is recommended that total weight placed in section 1 be equal to total weight in both section 2 and 3.