Luxe Queuing Backs

Pick your height, type, and material of back.

Heights

• Nominal heights available are 40″, 48″, 54″ or 60″ (1016 mm, 1219 mm, 1372 mm, or 1524 mm) posts

Back Options

• 1″ x 1″ (25 mm x 25 mm) Crossbars two (2) required per section
• Hardboard Two (2) sides
• Pegboard Two (2) sides
• Slatwall Two (2) sides
• Slatwall One (1) side
• MegaWall™ One (1) back slotted on two (2) sides
• Grid Backs One (1) side
• Grid Backs Two (2) sides

Merchandising the Luxe Queuing System

1.  If a section has a 4-sided post and only rails, it can only have shelf merchandising.
2.  If a section has a 4-sided post and a panel that can be merchandised, it can have a shelf and panel merchandising.
3.  If a section has a 2-sided post and a panel that can be merchandised, it can only be panel merchandised.
4.  If a section has a 2-sided post and only rails, it cannot be merchandised.

Certain panel placement can restrict merchandising capabilities

1.  The plan below uses all posts with slots on four sides.
2.  If a panel blocks the slots on a post, shelf merchandising is not possible.
3.  Exception: If connection rails are used (see number four above), shelf merchandising is possible between the connector rails where the slots are not used.